Digium TC400B is a bundle of the half-length, low-profile PCI-2.2 compliant Digium TC400P base card and the Digium TC400M voice processing module. Digium TC400B is designed to handle, in dedicated DSP resources, the complex codec translations for highly compressed audio as would otherwise be processed by Asterisk in software.

Asterisk, in software and with Digium G.729a licensing, is capable of transforming the G.729a codec into other codecs for the purposes of call origination or termination, bridging disparate calls, or VoIP to TDM connectivity. These transformations in software are very expensive, in terms of MIPS, and require a substantial amount of CPU time to accomplish. Digium TC400B not only relieves the CPU of this duty, freeing it up to handle other tasks or to complete additional call processing; but also provides Asterisk with the capability of bridging G.723.1 compressed audio into other formats, a capability not previously possible.

Digium TC400B decompresses G.729a (8.0kbit) or G.723.1 (5.3kbit) into u-law or a-law; or, compresses u-law or a-law into G.729a (8.0kbit) or G.723.1 (5.3kbit). The TC400B is rated to handle up to 96 bi-directional G.729a transformations or 92 bi-directional G.723.1 transformations. Digium TC400B does not require additional licensing fees for the use of these codecs nor does it require the registration process associated with Digium's software-based G.729a codec licensing.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium TDM410P is a half-length PCI 2.2-compliant modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines.

Scaling of this solution is accomplished by adding additional TDM410P or other Digium analog interface cards.

Note: The 12V power connector is required for the operation of FXS modules. It is not required for the operation of FXO modules.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium TDM410P is a half-length PCI 2.2-compliant modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines.

Scaling of this solution is accomplished by adding additional TDM410P or other Digium analog interface cards.

Note: The 12V power connector is required for the operation of FXS modules. It is not required for the operation of FXO modules.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium TDM410PE is a half-length PCI 2.2-compliant modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines.

Digium TDM410PE incorporates the VPMADT032 hardware echo cancellation module that provides 1024 taps (128 milliseconds) of echo cancellation for superior voice quality on both trunk and station interfaces. Scaling of this solution is accomplished by adding additional TDM410PE or other Digium analog interface cards.

Note: The 12V power connector is required for the operation of FXS modules. It is not required for the operation of FXO modules.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium TDM410PE is a half-length PCI 2.2-compliant modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines.

Digium TDM410PE incorporates the VPMADT032 hardware echo cancellation module that provides 1024 taps (128 milliseconds) of echo cancellation for superior voice quality on both trunk and station interfaces. Scaling of this solution is accomplished by adding additional TDM410PE or other Digium analog interface cards.

Note: The 12V power connector is required for the operation of FXS modules. It is not required for the operation of FXO modules.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium Wildcard TDM2400P supports up to a total of 24 FXO and/or FXS connections with X400M (4FXO) and/or S400M (4FXS) modules. The total X100M (FXO)/S110M (FXS) modules cannot exceed 4 modules (or 4 ports).

The X400M (4FXO) module allows the TDM400P card to terminate analog telephone lines (POTS). The S400M (4FXS) module allows the TDM2400P card to terminate analog telephones.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium Wildcard TDM2400P Asterisk PCI Card with Echo Cancellation; 4 FXO ports

Digium Wildcard TDM2400PE supports up to a total of 24 FXO and/or FXS connections with X400M (4FXO) and/or S400M (4FXS) modules. The total X100M (FXO)/S110M (FXS) modules cannot exceed 4 modules (or 4 ports).

The X400M (4FXO) module allows the TDM400P card to terminate analog telephone lines (POTS). The S400M (4FXS) module allows the TDM2400PE card to terminate analog telephones.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium Wildcard TDM2400P supports up to a total of 24 FXO and/or FXS connections with X400M (4FXO) and/or S400M (4FXS) modules. The total X100M (FXO)/S110M (FXS) modules cannot exceed 4 modules (or 4 ports).

The X400M (4FXO) module allows the TDM400P card to terminate analog telephone lines (POTS). The S400M (4FXS) module allows the TDM2400P card to terminate analog telephones.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium Wildcard TDM2400P Asterisk PCI Card with Echo Cancellation; 4 FXS ports

Digium Wildcard TDM2400P supports up to a total of 24 FXO and/or FXS connections with X400M (4FXO) and/or S400M (4FXS) modules. The total X100M (FXO)/S110M (FXS) modules cannot exceed 4 modules (or 4 ports).

The X400M (4FXO) module allows the TDM400P card to terminate analog telephone lines (POTS). The S400M (4FXS) module allows the TDM2400P card to terminate analog telephones.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

The Digium TDM800P is a half-length PCI 2.2-compliant card for connecting analog telephones and analog POTS lines through a PC. The TDM800P supports combinations of FXS and/or FXO modules for a total of 8 lines.

The Digium TDM800P provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single PCI bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the TDM800P reduces part complexity, cable clutter, and points of failure.

The TDM800P contains two module banks. Each bank supports up to four analog interfaces. The module banks may be filled either with one standard Digium quad analog module (FXS - S400M, FXO - X400M), or up to two standard Digium single analog modules (FXS- S110M, FXO - X100M) enabling the creation of any combination of ports.

The Digium TDM800P may be used in conjunction with Digium's High Performance Echo Canceler (HPEC), a commercial and toll quality hybrid echo cancellation solution. Digium's HPEC provides 16ms to 128ms of selectable near-end ITU G.168 compliant echo cancellation in software.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium Wildcard TE120P is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium's VoiceBus technology. VoiceBus technology allows the TE120P to use an industry standard bus-mastering PCI interface, as found in millions of PCs worldwide, to maximize system compatibility and eliminate system conflicts.

Digium Wildcard TE120P supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice, routed directly to the Asterisk Open Source PBX, and 12 to data, handled by the underlying Linux operating system, thus eliminating the need for an external router. Digium Wildcard TE120P works in both 3V and 5V slots by auto detecting the slot's voltage.

By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive Digium process, you can easily connect multiple PCs equipped with the Digium Wildcard TE120P and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple TE120Ps to each individual PC. Add additional cards as you need them for your expanding applications.

Digium Wildcard TE120P supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium TE121 is a high-performance, cost effective digital telephony interface card with the power to create a seamless network, interconnecting traditional telephony systems with emerging Voice over IP technologies.

Used in conjunction with Asterisk, the Digium TE121 can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-way Calling, and VoIP Gateways.

Digium TE121 is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium's VoiceBus technology. VoiceBus technology allows the Digium TE121 to use an industry standard bus-mastering PCI Express interface, as found in millions of PCs worldwide, to maximize system compatibility and eliminate system conflicts.

Digium TE121 supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice, routed directly to the Asterisk Open Source PBX, and 12 to data, handled by the underlying Linux operating system, thus eliminating the need for an external router.

By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive Digium process, you can easily connect multiple PCs equipped with the Digium TE121 and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple Digium TE121 cards to each individual PC. Add additional cards as you need them for your expanding applications.

Digium TE121 supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium TE121B is a high-performance, cost effective digital telephony interface card with the power to create a seamless network, interconnecting traditional telephony systems with emerging Voice over IP technologies.

Used in conjunction with Asterisk, the Digium TE121B can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-way Calling, and VoIP Gateways.

Digium TE121B is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium's VoiceBus technology. VoiceBus technology allows the Digium TE121B to use an industry standard bus-mastering PCI Express interface, as found in millions of PCs worldwide, to maximize system compatibility and eliminate system conflicts. Digium TE121B incorporates Digium's VPMADT032 echo cancellation module to deliver 128ms of echo cancellation across 30 channels in E1 mode or 24 channels in T1 mode.

Digium TE121B supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice, routed directly to the Asterisk Open Source PBX, and 12 to data, handled by the underlying Linux operating system, thus eliminating the need for an external router.

By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive Digium process, you can easily connect multiple PCs equipped with the Digium TE121B and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple Digium TE121B cards to each individual PC. Add additional cards as you need them for your expanding applications.

Digium TE121B supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium Wildcard TE122P is a high-performance, cost effective digital telephony interface card with the power to create a seamless network, interconnecting traditional telephony systems with emerging Voice over IP technologies.

Used in conjunction with Asterisk, the Digium TE122P can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-way Calling, and VoIP Gateways.

Digium Wildcard TE122P is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium's VoiceBus technology. VoiceBus technology allows the TE122P to use an industry standard bus-mastering PCI interface, as found in millions of PCs worldwide, to maximize system compatibility and eliminate system conflicts.

Digium TE122P supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice, routed directly to the Asterisk Open Source PBX, and 12 to data, handled by the underlying Linux operating system, thus eliminating the need for an external router. The Digium TE122P works in both 3V and 5V slots by auto detecting the slot's voltage.

By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive Digium process, you can easily connect multiple PCs equipped with the Digium TE122P and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple Digium TE122Ps to each individual PC. Add additional cards as you need them for your expanding applications.

Digium TE122P supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium Wildcard TE122B is a high-performance, cost effective digital telephony interface card with the power to create a seamless network, interconnecting traditional telephony systems with emerging Voice over IP technologies.

Used in conjunction with Asterisk, the Digium TE122B can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-way Calling, and VoIP Gateways.

Digium Wildcard TE122B is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium's VoiceBus technology. VoiceBus technology allows the TE122B to use an industry standard bus-mastering PCI interface, as found in millions of PCs worldwide, to maximize system compatibility and eliminate system conflicts. Digium TE122B incorporates Digium's VPMADT032 echo cancellation module to deliver 128ms of echo cancellation across 30 channels in E1 mode or 24 channels in T1 mode.

Digium TE122B supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice, routed directly to the Asterisk Open Source PBX, and 12 to data, handled by the underlying Linux operating system, thus eliminating the need for an external router. The Digium TE122B works in both 3V and 5V slots by auto detecting the slot's voltage.

By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive Digium process, you can easily connect multiple PCs equipped with the Digium TE122B and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple Digium TE122Bs to each individual PC. Add additional cards as you need them for your expanding applications.

Digium TE122B supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

TE205P supports both E1 and T1 environments and is selectable on a per-card or per-port basis.

This feature enables signaling translation between E1 and T1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE205P improves I/O speed over slave-only architecture, the result is reduced CPU usage and increased card density per server.

Important Note: TE205P is for use only with a 5.0 volt PCI slot.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

TE207P offers an onboard echo cancellation module. It supports both E1 and T1 environments and is selectable on a per-card or per-port basis.

The TE207P is a bundling of Digium's leading TE205P product and the VPM450M Octasic DSP-based echo cancelation module. The VPM450M provides a certified carrier-grade algorithm that has been labeled a benchmark for echo cancelation.

The VPM450M enables users to eliminate echo tails up to 128ms or 1024 taps across all 64 channels in E1 mode or 48 channels in T1/J1 modes. Further, this module takes advantage of the Octasic Voice Quality Enhancement to provide superior sound quality on all calls.

Important Note: TE207P is for use only with a 5.0 volt PCI slot.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

TE210P supports both E1 and T1 environments and is selectable on a per-card or per-port basis.

This feature enables signaling translation between E1 and T1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE210P improves I/O speed over slave-only architecture, the result is reduced CPU usage and increased card density per server.

Important Note: TE210P is for use only with a 3.3 volt PCI slot.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

TE212P offers an onboard echo cancellation module. It supports both E1 and T1 environments and is selectable on a per-card or per-port basis.

The TE212P is a bundling of Digium's leading TE210P product and the VPM450M Octasic DSP-based echo cancelation module. The VPM450M provides a certified carrier-grade algorithm that has been labeled a benchmark for echo cancelation.

The VPM450M enables users to eliminate echo tails up to 128ms or 1024 taps across all 64 channels in E1 mode or 48 channels in T1/J1 modes. Further, this module takes advantage of the Octasic Voice Quality Enhancement to provide superior sound quality on all calls.

Important Note: TE207P is for use only with a 3.3 volt PCI slot.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

TE405P supports both E1 and T1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1 and T1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE405P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Important Note: TE405P is for use only with a 5.0 volt PCI slot.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

TE407P offers an onboard echo cancellation module. It supports both E1 and T1 environments and is selectable on a per-card or per-port basis.

The TE407P is a bundling of Digium's leading TE405P product and the VPM450M Octasic DSP-based echo cancelation module. The VPM450M provides a certified carrier-grade algorithm that has been labeled a benchmark for echo cancelation.

The VPM450M enables users to eliminate echo tails up to 128ms or 1024 taps across all 128 channels in E1 mode or 96 channels in T1/J1 modes. Further, this module takes advantage of the Octasic Voice Quality Enhancement to provide superior sound quality on all calls.

Important Note: TE412P is for use only with a 5.0 volt PCI slot.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

TE410P supports both E1 and T1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1 and T1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE410P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Important Note: TE410P is for use only with a 3.3 volt PCI slot.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

TE412P offers an onboard echo cancellation module. It supports both E1 and T1 environments and is selectable on a per-card or per-port basis.

The TE412P is a bundling of Digium's leading TE410P product and the VPM450M Octasic DSP-based echo cancelation module. The VPM450M provides a certified carrier-grade algorithm that has been labeled a benchmark for echo cancelation.

The VPM450M enables users to eliminate echo tails up to 128ms or 1024 taps across all 128 channels in E1 mode or 96 channels in T1/J1 modes. Further, this module takes advantage of the Octasic Voice Quality Enhancement to provide superior sound quality on all calls.

Important Note: TE412P is for use only with a 3.3 volt PCI slot.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium's TE220 PCI Express card provides termination of up to 60 channels of voice or data across two E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE220 allows E1 and T1 circuits to be mixed with full channel synchronization. Supporting PCIe x1, the TE220 may be used in any available PCIe 1.0 compliant slot - 1x, x4, x8, and x16 without considerations for voltage selection or lane size.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium's TE220B PCI Express card provides termination of up to 60 channels of voice or data across two E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE220B allows E1 and T1 circuits to be mixed with full channel synchronization. Supporting PCIe x1, the TE220B may be used in any available PCIe 1.0 compliant slot - 1x, x4, x8, and x16 without considerations for voltage selection or lane size.

The TE220B includes Digium's VPMOCT064 Octasic DSP-based echo cancellation module. The VPMOCT064 provides the G.168 algorithm which has been labeled a benchmark for echo cancellation and performs 128ms (1024 taps) of echo cancellation across all 60 channels in E1 mode or all 48 channels in T1/J1 modes.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium's TE420 PCI Express card provides termination of up to 120 channels of voice or data across four E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE420 allows E1 and T1 circuits to be mixed with full channel synchronization. Supporting PCIe x1, the TE420 may be used in any available PCIe 1.0 compliant slot - 1x, x4, x8, and x16 without considerations for voltage selection or lane size.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium's TE420B PCI Express card provides termination of up to 120 channels of voice or data across four E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE420B allows E1 and T1 circuits to be mixed with full channel synchronization. Supporting PCIe x1, the TE420B may be used in any available PCIe 1.0 compliant slot - 1x, x4, x8, and x16 without considerations for voltage selection or lane size.

The TE420B includes the Digium's VPMOCT128 Octasic DSP-based echo cancellation module (not shown in picture). The VPMOCT128 provides the G.168 algorithm which has been labeled a benchmark for echo cancellation and performs 128ms (1024 taps) of echo cancellation across all 128 channels in E1 mode or all 96 channels in T1/J1 modes.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Digium B410P card is based on the industry-standard Cologne Chip HFC-4S ISDN Controller.

B410P is a half-length, full-height universal 3.3V and 5.0V 32-bit PCI 2.2 card supporting four BRI S/T interfaces. Each of the four ports of the B410P can be independently configured for TE or NT mode, with an optional PWR400M module for supplying power to ISDN telephones. The B410P features on-board hardware echo cancellation performing 64ms or 512 taps per channel for each of the eight voice channels.

The Digium B410P comes with four BRI S/T interfaces. It is a half-length, full-height universal 3.3V and 5.0V 32-bit PCI 2.2 card supporting. Using Digium's Asterisk PBX software and standard PC hardware, one can create a SOHO (Small Office Home Office) telephony environment that includes all the sophisticated features of a high-end business telephone system.

The B410P features on-board hardware echo cancellation performing 64ms or 512 taps per channel for each of the eight voice channels

Important Note: B410P is for use with both a 3.3 and 5.0 volt PCI slot.

MAPLELEAF's Product Warranty Period: 2-years

Availability: Immediate/In-Stock

Featuring the first Digium developed AsteriskGUI, the Asterisk Appliance 50 brings small to medium enterprises a feature-rich, cost-effective, reliable telephony solution.

The Asterisk Appliance (AA50) is a standalone embedded Asterisk-based PBX targeted for small to medium businesses (2-50 users), remote branch offices of larger organizations (2-50 users per site), and managed service providers for on-premise CPE-based solutions with SIP or IAX trunking. The AA50 also offers a hybrid solution alternative (a combination of VoIP applications using legacy telecom equipment) for enterprise customers who are not yet ready to migrate to a complete VoIP solution.

The Asterisk Appliance 50 features the commercially licensed Asterisk Business Edition software, as well as the first Digium developed AsteriskGUI. The AsteriskGUI was created to make the configuration, management, and fine tuning of your Asterisk system less complicated by providing an easy to use graphical interface. The AsteriskGUI is different from most interfaces that have been created for use with Asterisk, because the interface actually manipulates the Asterisk configuration files; meaning changes in each are reflected in the other in real time.

Features of Asterisk Appliance 50