beroNet BNXE1 PRI ISDN cards offer a powerful and flexible solution for the Open Source PBX Asterisk. Together with the beroNet channeldriver 'chan_mISDN', which is covered by the GPL licensing agreement, you can easily add PRI ports to your Asterisk system. beroNet's channel-driver is based on the new ISDN stack of the new Linux Kernel: mISDN (modular ISDN).

The beroNet BNXE1 card series has been developed to complete the Digium PRI product line in case of special scenarios. The BN2E1 has relays for interconnecting both ports if hardware or application is in fail. For ISDN data connections or fax connections through different beroNet cards it is possible to connect the cards through the PCM bus for switching channels in Hardware, so that there is no delay and the transmission of data or fax is assured. A typical use case for this is for example an ISDN data connection to a customer starting from the support pc (BRI) over the ISDN line of the whole company (PRI).

Features and Benefits

Availability: Immediate/In-Stock.

beroNet BNXE1 PRI ISDN cards offer a powerful and flexible solution for the Open Source PBX Asterisk. Together with the beroNet channeldriver 'chan_mISDN', which is covered by the GPL licensing agreement, you can easily add PRI ports to your Asterisk system. beroNet's channel-driver is based on the new ISDN stack of the new Linux Kernel: mISDN (modular ISDN).

The beroNet BNXE1 card series has been developed to complete the Digium PRI product line in case of special scenarios. The BN2E1 has relays for interconnecting both ports if hardware or application is in fail. For ISDN data connections or fax connections through different beroNet cards it is possible to connect the cards through the PCM bus for switching channels in Hardware, so that there is no delay and the transmission of data or fax is assured. A typical use case for this is for example an ISDN data connection to a customer starting from the support pc (BRI) over the ISDN line of the whole company (PRI).

Features and Benefits

Availability: Immediate/In-Stock.

beroNet offers with the BNXgsm card series, a powerful and flexible GSM solution for the Open Source PBX Asterisk. Together with the beroNet's channeldriver "chan_gsm", which is covered by the GPL licensing agreement, you can easily add GSM ports to your Asterisk system. Digital Audio quality with noise suppression and echo-cancellation is granted by the use of Siemens GSM Modules (Tri-Band900/1800/1900 MHz). Optional available are Siemens Modules with Tri-Band GSM/GPRS 850/1800/1900. Sending and receiving SMS throw the BNXgsm card is fully supported either by the Asterisk Manager interface or the Asterisk CLI.

The beroNet BNXgsm card series is available with 1, 2, or 3 GSM ports. Each GSM port has 2 SIM Card holder, one external (reachable from outside) and one on the rear side of the board. You can hot swap in software between the card holders during operation mode.

Features and Benefits

Availability: Immediate/In-Stock.

beroNet offers with the BNXgsm card series, a powerful and flexible GSM solution for the Open Source PBX Asterisk. Together with the beroNet's channeldriver "chan_gsm", which is covered by the GPL licensing agreement, you can easily add GSM ports to your Asterisk system. Digital Audio quality with noise suppression and echo-cancellation is granted by the use of Siemens GSM Modules (Tri-Band900/1800/1900 MHz). Optional available are Siemens Modules with Tri-Band GSM/GPRS 850/1800/1900. Sending and receiving SMS throw the BNXgsm card is fully supported either by the Asterisk Manager interface or the Asterisk CLI.

The beroNet BNXgsm card series is available with 1, 2, or 3 GSM ports. Each GSM port has 2 SIM Card holder, one external (reachable from outside) and one on the rear side of the board. You can hot swap in software between the card holders during operation mode.

Features and Benefits

Availability: Immediate/In-Stock.

beroNet offers with the BNXgsm card series, a powerful and flexible GSM solution for the Open Source PBX Asterisk. Together with the beroNet's channeldriver "chan_gsm", which is covered by the GPL licensing agreement, you can easily add GSM ports to your Asterisk system. Digital Audio quality with noise suppression and echo-cancellation is granted by the use of Siemens GSM Modules (Tri-Band900/1800/1900 MHz). Optionally available are Siemens Modules with Tri-Band GSM/GPRS 850/1800/1900. Sending and receiving SMS throw the BNXgsm card is fully supported either by the Asterisk Manager interface or the Asterisk CLI.

The beroNet BNXgsm card series is available with 1, 2, or 3 GSM ports. Each GSM port has 2 SIM Card holder, one external (reachable from outside) and one on the rear side of the board. You can hot swap in software between the card holders during operation mode.

Features and Benefits

Availability: Immediate/In-Stock.

beroNet BNXS0 BRI ISDN cards offer a powerful and flexible solution for the Open Source PBX Asterisk. Together with beroNet's channel-driver "chan_mISDN", which is covered by the GPL licensing agreement, you can easily add BRI ports to your Asterisk system. beroNet's channel-driver is based on the new ISDN stack of the new Linux Kernel: mISDN (modular ISDN).

The beroNet BNXS0 card series is available with 2, 4, or 8 S0 ports, which can be configured individually for each port for NT (Network Termination) or for TE (Terminal Equipment) mode. In either mode the card supports Point-To-Multi-Point mode or Point-To-Point mode. As an option you can power each port (except BN8S0) with beroNet's power supply module (BN-Power) to provide current to your Terminal Equipment.

The beroNet Power Bundle is only necessary if you want to supply power to ISDN phones.

Features and Benefits

Availability: Immediate/In-Stock.

beroNet BNXS0 BRI ISDN cards offer a powerful and flexible solution for the Open Source PBX Asterisk. Together with beroNet's channel-driver "chan_mISDN", which is covered by the GPL licensing agreement, you can easily add BRI ports to your Asterisk system. beroNet's channel-driver is based on the new ISDN stack of the new Linux Kernel: mISDN (modular ISDN).

The beroNet BNXS0 card series is available with 2, 4, or 8 S0 ports, which can be configured individually for each port for NT (Network Termination) or for TE (Terminal Equipment) mode. In either mode the card supports Point-To-Multi-Point mode or Point-To-Point mode. As an option you can power each port (except BN8S0) with beroNet's power supply module (BN-Power) to provide current to your Terminal Equipment.

The beroNet Power Bundle is only necessary if you want to supply power to ISDN phones.

Features and Benefits

Availability: Immediate/In-Stock.

beroNet BNXS0 BRI ISDN cards offer a powerful and flexible solution for the Open Source PBX Asterisk. Together with beroNet's channel-driver "chan_mISDN", which is covered by the GPL licensing agreement, you can easily add BRI ports to your Asterisk system. beroNet's channel-driver is based on the new ISDN stack of the new Linux Kernel: mISDN (modular ISDN).

The beroNet BNXS0 card series is available with 2, 4, or 8 S0 ports, which can be configured individually for each port for NT (Network Termination) or for TE (Terminal Equipment) mode. In either mode the card supports Point-To-Multi-Point mode or Point-To-Point mode. As an option you can power each port (except BN8S0) with beroNet's power supply module (BN-Power) to provide current to your Terminal Equipment.

The beroNet Power Bundle is only necessary if you want to supply power to ISDN phones.

Features and Benefits

Availability: Immediate/In-Stock.

-	Cable: flat-ribbon cable for the daisy-chaining of several cards
-	Adapter: adapter with cable to give access to all 8 S/T interfaces
-	External PSU: 1 unit can feed all ports of 1 card for a maximum 2 x BN8S0 cards (up to 32 devices at 1W)
-	Output voltage 36VDC, output current 1A (36W). Input voltage 12VDC (typical)
-	Can be fed by an external source or PC
-	Power supply plug connection for two cards
-	Size: 12.5cm x 6.5cm x 4.5cm

Availability: Immediate/In-Stock.

The BNPW2 Power Supply feeds up to 4 ports of the BNxS0 card. You can plug and supply two ISDN units.

This module applies to the BNxS0 version 2.