beroNet cards and modules offer a powerful and flexible GSM solution for the Open Source PBX Asterisk®. Together with the beroNet's channeldrivers 'chan_mISDN' and 'chan_gsm', which are covered by the GPL licensing agreement, you can easily add BRI, PRI, and GSM ports to your Asterisk® system.

beroNet bero*fix card series is a powerful and flexible hardware solution to connect ISDN (BRI and/or PRI) and GSM lines to any SIP based VoIP system. Due to the special design of the hardware bero*fix will be detected as a standard Network card by the operating system. Usually the driver for this network card will be loaded automatically by the OS. The beroNet bero*fix card series consist of a baseboard and the so called Line Interfaces. Each baseboard can carry up to two Line Interfaces.

Manufacturer's Product Warranty Period: 2-years.

Availability: Immediate/In-Stock.

beroNet bero*fix card series is a powerful and flexible hardware solution to connect ISDN (BRI and/or PRI) and GSM lines to any SIP based VoIP system. Due to the special design of the hardware bero*fix will be detected as a standard Network card by the operating system. Usually the driver for this network card will be loaded automatically by the OS. The beroNet bero*fix card series consist of a baseboard and the so called Line Interfaces. Each baseboard can carry up to two Line Interfaces.

Additional Information/Documentation

• Product Datasheet

Manufacturer's Product Warranty Period: 2-years.

Availability: Immediate/In-Stock.

beroNet BF4S0 Line Interface is a 4-port BRI ISDN module for the bero*fix Card series. The beroNet BF4S0 Line Interface can be configured individually for each port to NT (Network Termination) or TE (Terminal Equipment) mode. In either modes the module supports Point-To-Multi-Point (PMP) or Point-To-Point (PTP). The TE/NT mode as well as the Line termination of 100 ohms are selectable via software (Jumper-free).

Features

• 4 BRI ports
• Each port can be configured individually for TE / NT mode
• Line termination (100 Ohms) for each port
• TE/NT as well as the line termination is selectable via software (Jumper-free)
• All ISDN ports are short-circuit protected (by electronic fuse, auto-reset)
• Hardware bridging (for transparent voice, data and fax transmission)

Additional Information/Documentation

• Product Datasheet

Manufacturer's Product Warranty Period: 2-years.

Availability: Immediate/In-Stock.

beroNet BF1E1 is a PRI ISDN module for the bero*fix card series. The beroNet BF1E1 module can be configured individually for each port to NT (Network Termination) or TE (Terminal Equipment) mode. The default Pin-Out of this module is always TE mode with PINS 1,2,4,5. If you want to use NT-mode you may need a cross-cable which is optionally available (BNE1Crosscable). Line termination (120/75 Ohms) is selectable for each port by DIP switches on the Line Interface.

Features

• 1 PRI port
• Each port can be configured individually for TE / NT mode
• Line termination selectable via DIP Switches
• Hardware bridging (for transparent voice, data and fax transmission)

Additional Information/Documentation

• Product Datasheet

Manufacturer's Product Warranty Period: 2-years.

Availability: Immediate/In-Stock.

beroNet BF2E1 is a PRI ISDN module for the bero*fix card series. The beroNet BF2E1 module can be configured individually for each port to NT (Network Termination) or TE (Terminal Equipment) mode. The default Pin-Out of this module is always TE mode with PINS 1,2,4,5. If you want to use NT-mode you may need a cross-cable which is optionally available (BNE1Crosscable). Line termination (120/75 Ohms) is selectable for each port by DIP switches on the Line Interface.

Features

• 2 PRI ports
• Each port can be configured individually for TE / NT mode
• Line termination selectable via DIP Switches
• Hardware bridging (for transparent voice, data and fax transmission)

Additional Information/Documentation

• Product Datasheet

Manufacturer's Product Warranty Period: 2-years.

Availability: Immediate/In-Stock.